FREE Shipping on orders over $60

Leather Strops & Sharpening Stones

View as

Leather Strops & Sharpening Stones - Australia

Looking after your straight razor is essential, and is a fundamental part of the ritual of using a traditional cut-throat razor. Be sure to strop your razor before every shave with a leather strop, which keeps the edge straight and polished, free of debris. 

Breathe new life into the edge of a blade with a Shapton Glass Stone, which sharpens the razor without the need for soaking.

What is a Leather Strop? 

A leather strop is a strip of leather used to straighten and polish the edge of a straight razor, maintaining its sharpness and smoothness.

Why Do I Need a Strop For My Straight Razor?

Stropping aligns the microscopic teeth of the razor blade, which helps maintain its sharpness and ensures a smooth shave. It also removes any minor nicks or burrs that might develop during use.

How Do I Use a Leather Strop?

Hold the razor with the spine leading, and gently draw the blade away from the edge along the strop. Flip the blade over on its spine and repeat the process in the opposite direction. This should be done with minimal pressure to avoid damaging the edge.

What is a Sharpening Stone? 

A sharpening stone hones and sharpens the edge of a straight razor. They come in various grits and materials.

Why Do I Need a Sharpening Stone For My Straight Razor? 

Over time, even with regular stropping, a straight razor will lose its edge and require honing. A sharpening stone is essential for restoring the sharpness of the blade. Generally, a straight razor should be honed every few months, or when stropping no longer maintains its sharpness.

What Grit Sharpening Stone Should I Use For My Straight Razor? 

Use a coarse stone (1000-3000 grit) to repair nicks or reshape the edge, a medium stone (4000-8000 grit) for refining the edge, and a fine stone (10,000-12,000 grit or higher) for polishing the edge to razor sharpness.

How Do I Use a Sharpening Stone? 

Wet the stone (if using a water stone) and hold the razor at a consistent angle (usually around 20 degrees). Move the blade in a sweeping motion across the stone, ensuring even pressure and coverage. Repeat this on both sides of the blade, progressing through finer grits.